Dualtron 2

  • $$1950.00

 Dualtron 2+ is available! 

 3600W Dual Motors (40mph max)

 60V1658Wh LG Battery (80 miles distance)

Dual Disk Brakes

 Ruber Suspension

Share To:

The Ultimate All Wheel Drive
All Terrain Driving Machine
Dualtron II!

The dream of electric technology





MX : 1,077Wh
EX : 1,202Wh
EX+ : 1,450Wh
LTD : 1,657Wh


MX-EX+Around 28kg
LTD: 30kg


Max 65km/h


Max100~120km(Based on LTD)


More than 47%


10”Designed for Easy disassembly


Two Touch double folding handle post

Max Load

Two Touch double folding handle post

Emergence of the world class premium off road electric scooter - DUALTRON 2

Following on the wildly successful flagship model of Minimotors, the Dualtron II is a revised edition featuring completely new upgrades based on user demands.

With newly upgraded power train systems and improved suspension technology which gives it high acceleration and gradability, the Dualtron II combines form with function that takes you on urban escapades and off road Jaunts. 

High capacity and performance Li-Ion Battery pack for longer mileage

Taking the 52V Max 2,700W of Dualtron 2016 model a notch higher, the 2017 Dualtron II bumps up the power with a whooping 60V Max 3,600W BLDC Dual Hub motor with a new power train system for improved torque and speed, resulting in higher acceleration and gradability.

Powerful Torque from 60V new power train system

With four battery type selections (MX, EX, EX+, LTD) to choose from, the Dualtron II caters towards different user needs.
The Dualtron EX+ model with a 1,450Wh battery gives you a mileage of about 110km at ECO mode while Dualtron II Limited edition (LTD), with a 1,657Wh battery, gives you a mileage up to 120km at ECO mode.
Note: Mileage can be affected by laden weight, wind resistance and direction, road surface conditions, slopes, tire pressure and other variables.

Multi charging and auxiliary battery Expansion port

The Dualtron II now features an additional charging terminal for faster charging. A quick charging kit lets you fully recharge in only 3 hours.
The built in battery can comfortably hold enough power for long distance trips, but with an auxiliary battery port, your eScooter mileage can be increased by adding on an External Battery Expansion pack.
Ask about our Ranger Battery Expansion Pack at our service centers.

Main Battery On/Off Switch & Auxiliary battery Selection

A main on/off switch under the deck controls toggles between the main and auxiliary battery when an external battery expansion pack is plugged in.

Dual Brake Action from Physical and Integrated Electrical Motor Braking

Dualtron2 is fitted with integrated electric motor braking as well as 2 mechanical disk brakes, this system assists the rider when braking on slippery or sandy surfaces and prevents the mechanical brakes from locking.
To increase safety, faster reaction time and braking efficiency during sudden stops, the Dualtron II combines high physical braking force with electrical cut off when brakes are applied. Electric brake can be enabled and level adjusted from throttle settings.

Autorecovery Charging for Electrical brake

When activated, the electric brake can generate a charge of up to maximum 15A which is fed back to the battery using the auto recovery charging function. This helps to conserve energy from your battery.

Front and Rear High Density , High Impact PU integrated Suspension System 

One of the hallmarks of Dualtron Escooters, Dualtron II’s front and rear high density, high impact PU integrated suspension system with forged alloy swing arms and large ground clearance provides stable, comfortable and safe riding on and off road. (Patented)

LED Light System

The built-in Rear LED light reduces the risk of accidents while riding at night.

Dualtron II is equipped with an on deck light switch to turn on and off the headlight and taillights.

LCD Smart throttle display

With more settings available, the smart throttle calls up to 10 active mode settings and provides more accurate speed and riding information.

High Strength Two Touch Folding Mechanism

The Dualtron II’s sturdy two touch folding system combines a tough steering stem receptacle with a robust lock, built to withstand shocks on uneven road surfaces. This allows you to navigate on all road conditions safely with a peace of mind.
When done with your trip, the handle frame can be unlocked and folded down easily to the board, ready for storage or transportation.

Rugged Wide Deck with for Extra Stability

Improving on the previous design, Dualtron II’s wide sturdy deck is 6cm longer and ensures a more flexible and comfortable riding stance and stable foothold with its high grip surface finishing. Model Initials are engraved on the deck for easier identification.

Motocross style handlebars

Ready for action, the ergonomic handle grip of the Dualtron II are made of non-slip natural rubber which offers a firm, comfortable grip. The material is tough and does not tear easily.

Rear Wheel Mud Guard

A long rear fender mud guard helps to keep the mud and dirt away when you are riding on wet surfaces.


Important Notes!

Important Notes!
It is your responsibility to perform Periodic inspection on your eScooter!
Note all precautions and critical inspection checks to avoid breakdowns and accidents!
Please check the safety precautions and important inspection details of each product. Do familiarize yourself with the replacement cycle timing of consumable parts in order to maintain and use the product safely.


Precautions before use

(1)It is recommended that protective gear, such as helmets, gloves, knee and elbow protectors be worn while operating the eScooter.
(2)Please keep in mind that certain articles of clothing, bags, and shoelaces, and even long hair, may cause safety incidents if they are caught in moving parts like motors, wheels, or tires.
(3)Improper footwear that may interfere with safe operation, such as slippers, high heels, etc., are prohibited from use while riding the eScooter.
(4)It is prohibited to operate the eScooter under the influence of alcohol.
(5)The eScooter is to be ridden by one person. Please observe local laws on prohibitions on carrying cargo or extra riders.
(6)Do not engage in stunts or acrobatics that may cause product failure.
(7)Do not let water get into the product because it is not waterproof. Do not wash the product with water, leave the product in environments that would cause it to get wet by condensation, or drive on wet roads during rain or snowy weather.
(8)Be sure to hold the handle firmly with both hands while riding. Always hold the handle in such a way that you can immediately use the brake for unexpected situations.
Do not use the built-in DC converter for LED lighting or other

Lithium battery Precautions

(1) Only use original chargers from the manufacturer.
(2) Do not immerse the battery in liquids, attempt to disassemble, or modify the battery.
(3) Charge the battery in temperatures between 0 to 45°C, discharge normally between -20 ~ 60°C.
(4) When storing for a long period, charge the battery to 70-80%.
(5) In case of overheating, or if smoke or fire is detected in the battery compartment, immediately stop using or charging, move the product outdoors, and use a fire extinguisher.

Always Check!

Main Checks

(1)Before using the product, check the condition of all eScooter parts, such as motors, brakes, wheels, handles, chasis, etc.
Make sure all bolts and nuts are properly tightened.
(2)Replace the tires if damaged or worn out.
(3)Always check the air pressure of the tires before use. Tire air pressure must be maintained between 40 to 45 PSI.
(4)Always confirm that the brakes are working and check the condition of the brake pads (consumable item) before using the eScooter.
(5)If the brakes are loose or if the brake pads are deformed, check that all the nuts and bolts of the brake assembly are properly tightened. If the brakes cannot be adjusted, replace the brakes before use.

Canceling Cruise Control:

Cruise control mode can be canceled via throttling or by braking.

Precautions when using the cruise control function:

(1)When the cruise control function is activated, the cruise control can be cancelled when brakes are applied. Be sure to be riding in a position where you can use the brakes immediately.
In dual drive mode, when switching from cruise control to single drive mode, cancelling cruise mode using throttle is switched off, and can only be cancelled by braking.

Parts and Components Checklist

Acceleration Throttle
● Check if the acceleration throttle lever is operating normally.
● When pulling or releasing the throttle lever, it is necessary to operate it by bending or releasing the lever smoothly with your fingers.
● Do not pull the throttle too hard. If the throttle lever does not returned to the home position upon release, or is caught in position, immediately brake and stop the eScooter.
● Check to see if the throttle and casing fixing bolt are loose. Tighten where necessary.
Apply grease to keep smooth operation
Sliding Lock and QR Lever
● Check that the bolt of the sliding lock is properly tightened so that the handle post is not loose.
● After confirming that the stem lock and bolt are secured, push down the QR lever to tighten.
Folding section
● If the vehicle is being continuously driven or used outside normal driving guidelines, subjected to collisions, falls, and heavy equipment loading, mechanical parts (such as hinges, fixing bolts, etc.)can accumulate material fatigue and weaken due to stress and deformation.
● After a certain period of use, it is necessary to check all components and parts for wear and tear and replace as required.
(Please refer to Parts Replacement Cycle)
Front and Rear Suspension Assembly
● Check all bolts and nuts for looseness that can affect the performance of the suspension assembly.
● Be sure to replace parts with signs of fatigues such as cracks, deformation or discoloration.
● Suspension Rubber Cartridges should be replaced if the suspension is reduced.
● Elasticity of the rubber cartridges may vary due to the seasonal nature of the rubber material.
● Ensure that the handle bar is fully pulled out and locked in place before using.
Brake Cable Lever and Caliper Connection
● ECheck both ends of the cable for any external damages.
● If the cable does not work properly, replace it promptly.
Brake Lever
● Check the brake lever for damages after impacts from collisions or falls.
● If the motor cut-off wiring is damaged and the motor power cut off is affected, be sure to replace before use.
● Always check that the product has sufficient braking power.
Lower Hinge
● Make sure that the bearings are smooth.
Steering Tube
● Check all bolts and nuts on the folding section and the handle bar to make sure they are tightened.
● Putting excessive attachments (such as basket, bags, etc.) to the column and handle is prohibited. Excessive load on the steering unit can cause difficulties in steering which may result in accidents.
Fixing bolt
● Check that this is tightened
Side stand
● Do not use excessive force on the side stand as it may damage the product.
● PDo not stand on or ride the eScooter with the side stand extended as it may cause accidents.
ON / OFF Power Switch
● After use, always keep the power switch OFF and check if the power is correctly shut off.

Parts Maintenance and Replacement Cycle

Maintenance of Parts and Parts Replacement Cycle

The parts and components of your eScooter can be damaged by various factors. The life span of each part varies depending on riding habits and environments of use. Parts that exceed their service life may fail and cause accidents. Being familiar with the various parts and their replacement cycles, and performing regular checks will help to maintain your product in good working condition and to prevent safety incidents.

No Part Name Part location Replacement Cycle/km
1 LOWER HINGE Internal 2 years / 7,000
2 HIGHER HINGE External 3 years / 20,000
3 HINGE BOLT External 1 years / 5,000
4 STEERING TUBE External 3 years / 20,000
5 HANDLE STEM External 3 years / 20,000
6 SLIDE LOCKING External 2 years / 10,000
7 BATTERY Internal 2 years / 20,000
8 OTHERS Internal/External When damaged or deformed

Parts may experience fatigue failure depending on the driving environment and conditions of use. Always check for abnormalities even if there is no replacement cycle.

Inspection of external damage:
The time for replacement of parts is different according to different driving environment and usage method. If parts have exceeded their stated lifespan, or show signs of fatigue or weakness, such as deformation, cracks, discoloration, or signs of abnormality, please replace promptly for safety reasons.

Use and care tips : Lithium-ion battery

1. Only use the charger that was supplied with your product to charge lithium-ion battery. Use of an unauthorized charger could cause serious damage to the battery and can cause fire.
2. Charge lithium-ion battery within 0-45°C and discharge within -20-60°C. Charging and discharging the battery outside the appropriate temperatures may damage the lithium-ion battery.
3. Do not leave the lithium-ion battery in places exposed to direct sunlight or high temperature. Do not store it in a wet environment. Always store it in a cool, dry place.
4. Charge lithium-ion battery in a dry, open, and well-ventilated environment. Do not charge the battery near inflammable goods.
5. In winter or cold weather, bringing the battery from outdoors to indoors may result in condensation due to difference of external and internal temperatures. In this case, do not charge the battery immediately but wait after the battery has warmed up to the surrounding temperature.
6. If the battery leaks, gives off an unusual smell, or if the protection circuit is damaged, contact the authorized service center immediately and get technical support.
7. Put lithium-ion batteries in a safe place out of reach of children and pets.
8. Do not reverse the polarity on a battery or short-circuit. Exposing the battery to excessive shock can result in explosion of battery.
9. Do not do stunts or jumps on the product or ride it on bumpy surfaces. Exposing a battery pack to excessive shock can result in the battery catching fire. In case of accidents, remove the battery from the product to check for damages.
10. Do not connect the charger when the product is wet as you may risk electric shocks or having the battery catch fire. Do not charge the battery in this case and have the battery inspected by an expert before charging.
11. Do not disassemble or incinerate lithium-ion batteries. To safely dispose of a lithium-ion battery, dispose of it as industrial waste and be careful not to short-circuit the terminals.
12. If the battery require replacement after long-term use, get the replacement through an authorized dealer. Normally, the discharge capacity of lithium-ion battery decreases more than 15% after 300 cycles of use.
13. Do not use the battery if it leaks or gives off an odor, or has short-circuits inside the battery pack. Lithium-ion is an inflammable material. Avoid charging the battery without proper care. Be careful not to overcharge the battery to prevent fire hazards.
Use only with the authorized and recommended battery and charger. Manufacturer and distributor cannot be held responsible for any damage of your product by using unauthentic battery and charger.

Essential Checklist Before Usage

Check your product daily for safe usage!

Brakes and Cable Check

● Before driving, make sure that the brakes works well and there is enough braking power. ● if the braking power of the brake drops considerably even during use, it should be sent for inspection and repaired immediately before continuing usage.
● Check the brake pad for signs of wearing down. Replace if necessary.
● Check that the brake cables are not loose, or damaged.
● Brake cables are consumable items that may wear down depending on the user's driving environment. When operating the brakes, pay attention to any signs of brake failure, in particular if braking feels irregular, or there are strange noises while braking. It is important to check whether the inner wire of the cable is partially broken, worn or deformed, etc. Repetitive folding of the handle may cause the cables to bend excessively and deform or even break.

Make sure that the bolts and nuts of brake fixture are properly tightened, and that there is no deformation or damage to the brake disc.

● Check the brake pad for signs of wearing down. Replace if necessary.
● Check that the brake cables are not loose, or damaged.
● Brake cables are consumable items that may wear down depending on the user's driving environment. When operating the brakes, pay attention to any signs of brake failure, in particular if braking feels irregular, or there are strange noises while braking. It is important to check whether the inner wire of the cable is partially broken, worn or deformed, etc. Repetitive folding of the handle may cause the cables to bend excessively and deform or even break.

Make sure that the bolts and nuts of brake fixture are properly tightened, and that there is no deformation or damage to the brake disc.th the replacement cycle timing of consumable parts in order to maintain and use the product safely.

Tire appearance and pressure check

● Tire air pressure must be maintained between 40 to 45 PSI.
● When the tire pressure is insufficient, the distance traveled becomes shorter and possibility of puncture and accidents increases.
Check all folding joints

● Always check the product thoroughly before use.
● Check that there are proper clearances for each part.
● Check that all bolt and nuts on each section, particularly the foldable joints and handles of the product are properly tightened.

Various factors can cause malfunction!

As with all machines, this product may fail due to a number of factors. The life span of each part may vary depending on usage, and parts that exceed the service life may be damaged and cause accidents. Brake cables, forks, and brackets, are consumables that can become worn or deformed depending on the riding conditions. Any deformation in the shape, appearance of cracks, or discoloration of a part is an indication that its life span has been exceeded. It is recommended that you visit the store for replacement and safety inspection.

MOTOR 36 V 250 W  some remarks
BATTERY 6.4Ah 240Wh  
RANGE 15~25KM test

Write a review

    Bad           Good


Dualtron Raptor