SPEEDWAY 4

  • $$1890.00

The All New Speedway IV – Designed for the Rider!

With more sophisticated design the New Speedway IV is built with enhanced light system, electric brake function, integrated folding to enhance the driving comfort.

 








Share To:

With more sophisticated design the New Speedway IV is built with enhanced light system, electric brake function, integrated folding to enhance the driving comfort.

Motor

Max 3,600W BLDC DUAL HUB MOTOR

Battery

MX : 1,077Wh
EX : 1,202Wh
EX+ : 1,450Wh
LTD : 1,657Wh

Weight

MX-EX+Around 28kg LTD: 30kg

Speed

Max 65km/h

Distance

Max 100~120km(Based on LTD)

Gradability

More than 47%

Tire

10” Designed for Easy disassembly

Folding

Two Touch double folding handle post

Max Load

Load Around 120kg

 

Double the Power!

BLDC DUAL HUB MOTOR MAX 3600W!

With this edition, Speedway IV adopted the powerful BLDC HUB motor which made Dualtron the most stable driving machine with silent and balanced driving.
In addition, a Max 1,600W output delivers a powerful torque whenever you need it.

With a battery capacity of 1,347Wh from the biggest battery of the Speedway3 series, the Speedway IV has extra mileage to handle all forms of commute; be it leisure riding or hard core traveling.

Smooth ride from Dual Suspension!

Dual Air Spring Suspensions

With dual suspension, a feature usually reserved for the more luxurious models, you get a more comfortable and stable ride.

The newly introduced rear air suspension allows you to adjust the strength of the suspension by simply changing the position of the two step tension control.

Stiff tension is needed!

2 step tension control function of rear air suspension

When Speedway 4 is set to use the electric brake (P9 - Electronic Brake Intensity Medium (1), Hard (2), Off (0)), the electric brakes are applied to available smooth and stable braking and stopping. (Caution: Do not use when the battery is fully charged.)

Easy Wheel System!

3rd Generation Fully Detachable Hub Motor

Speedway4 has been upgraded to make it easier to remove from Easy Wheel Repair system that was introduced on Speedway3, and it is much easier to separate and recombine during tire puncture for user self maintenance.

Luxurious Wide Tubeless Tires for Safety, Comfort and Maintainability!

70mm Wide Tubeless Tire

The Speedway 4 comes with 70mm Wide Tubeless tires that provide unrivaled riding comfort, excellent grip and convenient maintenance. Damages can be easily repaired on the road with a tire repair kit.

The lighting system only for Speedway V that makes you shine!

LED Illumination System

The 5th generation Speedway V is equipped with dual front lamps, headlights, rear-side lamps and turn signals. The newly introduced logo mood lamps will make an instant fan out of you while increasing your visibility, thus reducing the risk of accidents while riding at night.

Speedway4 has applied variety light system for the emotional design of the Speedway. More beautiful and various light functions will increase the driving satisfaction.

The turn signal which is one of new functions for a user convenience can be used with a switch can mode left and right. It shows direct to turn with blinking rear side lamp and warning sound therefore it helps to keep the driving safety distance.

Equipped with the latest 3rd generation throttle!

The new EYE throttle system

The new 3rd Generation smart display EYE throttle system designed by Minimotors is an improvement over the previous design with innovative full featured LCD display and 3 button operation. Separating the previous two button combination into 3 independent button functions, the throttle is easier to use and faster to operate.

Enhanced Frame for robustness and performance under pressure!

Enhanced Aerodynamic Frame Design

Speedway V dual has been made more robust and secure for the higher power output from the Dual Motor Drive.
Speedway4 is robust with an integral folding parts arm and controller casing by CNC method. And the integral folding part minimize the play on the folding part.

The Speedway4 uses a deck system similar to the Dualtron and open and close decks easily with unscrew some screws for easy and shorter time maintenance.

Speedway4 is equipped with 52V 1,347Wh battery, which makes the deck longer than the Speedway3, makes comfortable driving. Also, with the rear air suspension, the height of the deck becomes even higher and it helps to secure a wide viewing angle when driving.

Size

Important Notes!

Important Notes!
It is your responsibility to perform Periodic inspection on your eScooter!
Note all precautions and critical inspection checks to avoid breakdowns and accidents!
Please check the safety precautions and important inspection details of each product. Do familiarize yourself with the replacement cycle timing of consumable parts in order to maintain and use the product safely.

Precautions

Precautions before use

(1)It is recommended that protective gear, such as helmets, gloves, knee and elbow protectors be worn while operating the eScooter.
(2)Please keep in mind that certain articles of clothing, bags, and shoelaces, and even long hair, may cause safety incidents if they are caught in moving parts like motors, wheels, or tires.
(3)Improper footwear that may interfere with safe operation, such as slippers, high heels, etc., are prohibited from use while riding the eScooter.
(4)It is prohibited to operate the eScooter under the influence of alcohol.
(5)The eScooter is to be ridden by one person. Please observe local laws on prohibitions on carrying cargo or extra riders.
(6)Do not engage in stunts or acrobatics that may cause product failure.
(7)Do not let water get into the product because it is not waterproof. Do not wash the product with water, leave the product in environments that would cause it to get wet by condensation, or drive on wet roads during rain or snowy weather.
(8)Be sure to hold the handle firmly with both hands while riding. Always hold the handle in such a way that you can immediately use the brake for unexpected situations.
Do not use the built-in DC converter for LED lighting or other
(9)purposes.

Lithium battery Precautions

(1) Only use original chargers from the manufacturer.
(2) Do not immerse the battery in liquids, attempt to disassemble, or modify the battery.
(3) Charge the battery in temperatures between 0 to 45°C, discharge normally between -20 ~ 60°C.
(4) When storing for a long period, charge the battery to 70-80%.
(5) In case of overheating, or if smoke or fire is detected in the battery compartment, immediately stop using or charging, move the product outdoors, and use a fire extinguisher.

Always Check!

Main Checks

(1)Before using the product, check the condition of all eScooter parts, such as motors, brakes, wheels, handles, chasis, etc.
Make sure all bolts and nuts are properly tightened.
(2)Replace the tires if damaged or worn out.
(3)Always check the air pressure of the tires before use. Tire air pressure must be maintained between 40 to 45 PSI.
(4)Always confirm that the brakes are working and check the condition of the brake pads (consumable item) before using the eScooter.
(5)If the brakes are loose or if the brake pads are deformed, check that all the nuts and bolts of the brake assembly are properly tightened. If the brakes cannot be adjusted, replace the brakes before use.


Canceling Cruise Control:

Cruise control mode can be canceled via throttling or by braking.


Precautions when using the cruise control function:

(1)When the cruise control function is activated, the cruise control can be cancelled when brakes are applied. Be sure to be riding in a position where you can use the brakes immediately.
In dual drive mode, when switching from cruise control to single drive mode, cancelling cruise mode using throttle is switched off, and can only be cancelled by braking.

Parts and Components Checklist

Acceleration Throttle
● Check if the acceleration throttle lever is operating normally.
● When pulling or releasing the throttle lever, it is necessary to operate it by bending or releasing the lever smoothly with your fingers.
● Do not pull the throttle too hard. If the throttle lever does not returned to the home position upon release, or is caught in position, immediately brake and stop the eScooter. Check the throttle and casing fixing bolt. It may be necessary to lubricate or adjust the fixing bolt to return the throttle to smooth operation.
● If the throttle shows signs of abnormality, such as having a wide gap, or if it has been damaged in an accident, check and replace as necessary.
QR Lever (Height Adjustment)
● Adjust the height of the handle and fix it with the QR lever.
● Check that the handlebar does not move, when the QR Lever is locked. If there is a gap that allows the handle bar to move, send for repairs before use.
Folding section
● If the vehicle is being continuously driven or used outside normal driving guidelines, subjected to collisions, falls, and heavy equipment loading, mechanical parts (such as hinges, fixing bolts, etc.)can accumulate material fatigue and weaken due to stress and deformation.
● After a certain period of use, it is necessary to check all components and parts for wear and tear and replace as required.
(Please refer to Parts Replacement Cycle)
Front and Rear Suspension Assembly
● Check all bolts and nuts for looseness that can affect the performance of the suspension assembly.
● Be sure to replace parts with signs of fatigues such as cracks, deformation or discoloration.
● Suspension Rubber Cartridges should be replaced if the suspension is reduced.
● Elasticity of the rubber cartridges may vary due to the seasonal nature of the rubber material.
Grip
● Ensure that the handle bar is fully pulled out and locked in place before using.
Brake Cable Lever and Caliper Connection
● ECheck both ends of the cable for any external damages.
● If the cable does not work properly, replace it promptly.
Brake Lever
● Check the brake lever for damages after impacts from collisions or falls.
● If the motor cut-off wiring is damaged and the motor power cut off is affected, be sure to replace before use.
● Always check that the product has sufficient braking power.
Handle Post (Steering Tube)
● Check all bolts and nuts on the folding section and the handle bar to make sure they are tightened.
● Putting excessive attachments (such as basket, bags, etc.) to the column and handle is prohibited. Excessive load on the steering unit can cause difficulties in steering which may result in accidents.
Side stand
● Do not use excessive force on the side stand as it may damage the product.
● PDo not stand on or ride the eScooter with the side stand extended as it may cause accidents.

Parts Maintenance and Replacement Cycle

Maintenance of Parts and Parts Replacement Cycle

The parts and components of your eScooter can be damaged by various factors. The life span of each part varies depending on riding habits and environments of use. Parts that exceed their service life may fail and cause accidents. Being familiar with the various parts and their replacement cycles, and performing regular checks will help to maintain your product in good working condition and to prevent safety incidents.

No Part Name Part location Replacement Cycle/km
1 HANDLE TBAR External 2 years / 5,000
2 STEERING TUBE External 2 years / 5,000
3 FOLDING JOINT Internal 2 years / 10,000
4 FOLDING MOUNT Internal 2 years / 5,000
5 FOLDING LOCK SET Internal 2 years / 3,000
6 FRONT SUSPENSION BOARD External 2 years / 10,000
7 FRONT SUSPENSION Internal 2 years / 20,000
8 REAR SUSPENSION ARM Internal 2 years / 10,000
9 BATTERY Internal 2 years / 20,000
10 OTHERS Internal/External When damaged or deformed
 

Parts may experience fatigue failure depending on the driving environment and conditions of use. Always check for abnormalities even if there is no replacement cycle.

Inspection of external damage:
The time for replacement of parts is different according to different driving environment and usage method. If parts have exceeded their stated lifespan, or show signs of fatigue or weakness, such as deformation, cracks, discoloration, or signs of abnormality, please replace promptly for safety reasons.

Use and care tips : Lithium-ion battery

1. Only use the charger that was supplied with your product to charge lithium-ion battery. Use of an unauthorized charger could cause serious damage to the battery and can cause fire.
2. Charge lithium-ion battery within 0-45°C and discharge within -20-60°C. Charging and discharging the battery outside the appropriate temperatures may damage the lithium-ion battery.
3. Do not leave the lithium-ion battery in places exposed to direct sunlight or high temperature. Do not store it in a wet environment. Always store it in a cool, dry place.
4. Charge lithium-ion battery in a dry, open, and well-ventilated environment. Do not charge the battery near inflammable goods.
5. In winter or cold weather, bringing the battery from outdoors to indoors may result in condensation due to difference of external and internal temperatures. In this case, do not charge the battery immediately but wait after the battery has warmed up to the surrounding temperature.
6. If the battery leaks, gives off an unusual smell, or if the protection circuit is damaged, contact the authorized service center immediately and get technical support.
7. Put lithium-ion batteries in a safe place out of reach of children and pets.
8. Do not reverse the polarity on a battery or short-circuit. Exposing the battery to excessive shock can result in explosion of battery.
9. Do not do stunts or jumps on the product or ride it on bumpy surfaces. Exposing a battery pack to excessive shock can result in the battery catching fire. In case of accidents, remove the battery from the product to check for damages.
10. Do not connect the charger when the product is wet as you may risk electric shocks or having the battery catch fire. Do not charge the battery in this case and have the battery inspected by an expert before charging.
11. Do not disassemble or incinerate lithium-ion batteries. To safely dispose of a lithium-ion battery, dispose of it as industrial waste and be careful not to short-circuit the terminals.
12. If the battery require replacement after long-term use, get the replacement through an authorized dealer. Normally, the discharge capacity of lithium-ion battery decreases more than 15% after 300 cycles of use.
13. Do not use the battery if it leaks or gives off an odor, or has short-circuits inside the battery pack. Lithium-ion is an inflammable material. Avoid charging the battery without proper care. Be careful not to overcharge the battery to prevent fire hazards.
Use only with the authorized and recommended battery and charger. Manufacturer and distributor cannot be held responsible for any damage of your product by using unauthentic battery and charger.

Essential Checklist Before Usage

Check your product daily for safe usage!

Brakes and Cable Check

● Before driving, make sure that the brakes works well and there is enough braking power. ● if the braking power of the brake drops considerably even during use, it should be sent for inspection and repaired immediately before continuing usage.
● Check the brake pad for signs of wearing down. Replace if necessary.
● Check that the brake cables are not loose, or damaged.
● Brake cables are consumable items that may wear down depending on the user's driving environment. When operating the brakes, pay attention to any signs of brake failure, in particular if braking feels irregular, or there are strange noises while braking. It is important to check whether the inner wire of the cable is partially broken, worn or deformed, etc. Repetitive folding of the handle may cause the cables to bend excessively and deform or even break.

Make sure that the bolts and nuts of brake fixture are properly tightened, and that there is no deformation or damage to the brake disc.

● Check the brake pad for signs of wearing down. Replace if necessary.
● Check that the brake cables are not loose, or damaged.
● Brake cables are consumable items that may wear down depending on the user's driving environment. When operating the brakes, pay attention to any signs of brake failure, in particular if braking feels irregular, or there are strange noises while braking. It is important to check whether the inner wire of the cable is partially broken, worn or deformed, etc. Repetitive folding of the handle may cause the cables to bend excessively and deform or even break.

Make sure that the bolts and nuts of brake fixture are properly tightened, and that there is no deformation or damage to the brake disc.th the replacement cycle timing of consumable parts in order to maintain and use the product safely.

Tire appearance and pressure check

● Tire air pressure must be maintained between 40 to 45 PSI.
● When the tire pressure is insufficient, the distance traveled becomes shorter and possibility of puncture and accidents increases.
Check all folding joints

● Always check the product thoroughly before use.
● Check that there are proper clearances for each part.
● Check that all bolt and nuts on each section, particularly the foldable joints and handles of the product are properly tightened.

Various factors can cause malfunction!

As with all machines, this product may fail due to a number of factors. The life span of each part may vary depending on usage, and parts that exceed the service life may be damaged and cause accidents. Brake cables, forks, and brackets, are consumables that can become worn or deformed depending on the riding conditions. Any deformation in the shape, appearance of cracks, or discoloration of a part is an indication that its life span has been exceeded. It is recommended that you visit the store for replacement and safety inspection.

 

Write a review

    Bad           Good





YOU MAY ALSO LIKE

E-SCOOTER
Dualtron Raptor

$1,950.00

SUBSCRIBE TO

MINIMOTORS NEWSLETTER